Part Number Hot Search : 
RU7550R VT3306L 4740A SSM6N 5CX3000 00MD6 RU7550R SL900
Product Description
Full Text Search
 

To Download BCS8R005F Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 8W CURRENT DETECT CHIP RESISTORS
Features...................................................................
Non inductive design. Low TCR, typically less than 30ppm/C. Low profile surface mount package. Excellent pulse/surge performance. 8W power rating.
Applications...............................................................
Current sense applications Over current protection in Battery chargers. Servo motor control circuits. DC-DC, DC-AC and intelligent power modules. Industrial PC modules (IPM) and precision measurement systems. Current detection circuits in high-speed CPU peripherals.
Specification
Type
Dimensions (mm)
A B C D Marking
BCS8 (mm) 12.8+/-0.5 6.4max 2.5max 1.3
B
Marking is done by 3 digits resistance value notation and tolerance code F (1%). D A D C
R001F
Specification
BCS8 0.5m, 1m, 2m, 3m, 4m, 5m , 10m +/-50ppm/C +/-1.0% (F), +/-5.0% (J) 8W 90A 126A 5nH -55 C to 175 C -55 C to 175 C
Specifications R+/-(0.5%+0.5m) R +/-(0.5%+0.5m) R +/-(1.0%+0.5m) R +/-(0.5%+0.5m) R +/-(0.5%+0.5m) R +/-(0.25%+0.5m) 90%/terminal surface R +/-(0.5%+0.1m) R +/-(0.5%+0.1m)
Remarks Measured +/- 30ppm/ C Attached to70 micron PCB At 1m 2.5 seconds one time
Resistance values TCR Tolerance Power Rating Current Rating Maximum Current Series Inductance Operating Temp. Storage Temp.
Short Time Overload Low Temperature Storage High Temperature Storage Heat Shock Vibration Soldering Heat Solderability Humidity Load Life
Specifications subject to change without notice.
Conditions maximum current, 2.5seconds. -55C, 24hours +175C, 1000hours -55C to +125C, 20min. interval, 5min. 5cycles 10-2000Hz, 1.5mm/20gr, 2hours 260C+/-5C, 10+/-1 seconds. 85C, 85%RH, dc0.1W, 1000 hours 25C, dc rated power, 90min ON, 30min OFF, 1000hours
1
BCS 8
8W 5025 CURRENT DETECT RESISTOR
Frequency Characteristics
Impedance() 0.050 0.010 0.005
Temperature Rise
Temperature (C) at hot spot.
250 200 150 100 50
BCS 8 R001 F
0.001 10k 100k 1M Frequency(Hz) 10M
0 0 2 4 6 8 Applied Power (W) 10 12
Dotted line: typical measurement R/R (ppm)
TCR Curves
Recommended Foot Print (mm)
7.4
+4000 Slope of +30ppm/C +2000 0 -2000 Slope of -30ppm/C
2.5 2.5
-4000 // -50
9.0
0 25 50 75 Resistor Temperature (C) 100 125
Soldering Recommendation
Due to the enhanced heat dissipation properties of the BCS8, the temperature profile during reflow soldering will need to be increased by: 10 to 20C.
Custom designs
Alternative widths and lengths are available, please contact factory for details.
FR4 Thermal PCB Characterisation
X MM
Pad Dimensions (x,y mm) 60, 45 50, 45 40, 40 30, 30 20, 20 10, 10
P90 C,
70um (W)
P90 C,
35um (W)
5.8 5.4 4.2 3.5 2.9 2.4
4.6 4.3 4.1 2.8 2.7 2.5
Y M M
BCS 8
Notes: Characterisation carried out using 70m and 35m PCB copper pad weights, with the temperature of 90C used as a maximum reference on the PCB.
2
BCS 8
8W 5025 CURRENT DETECT RESISTOR
Taping specification (BCS8)
1.75
13.30
11.50. 24.0+/-0.3
1.50 0.30+/-0.05 D t C B 2.00 4.00 4.80 Dia. 1.50+0.1-0 Dia.1.50+0.1-0
AX
D
P/N
BCS8 R001F BCS8 R002F BCS8 R003F BCS8 R003F BCS8 R004F BCS8 R005F
A/NA A A A A NA A
A 12.8 12.8 12.8 12.8 12.8 12.8
B 4.0 4.0 2.7 4.5 5.3 4.4
C 1.14 0.64 0.64 0.44 0.34 0.34
D 1.4 1.4 1.4 1.4 1.4 1.4
X 10.0 10.0 10.0 10.0 10.0 10.0
t 1.0 0.5 0.5 0.3 0.2 0.2
Note : Above dimensions are approximate.
Resistor Contact Probe Current Voltage
Resistance testing the BCS resistors is done at the side positions of resistor terminals (see figure) using a 4 - port measuring system. For a stated resistance tolerance of +/-1.0%, the measured values should be within the +/-0.8% factory tested values. When surface mount resistor is attached on circuit board, small resistance changes will occur, Custom designs are available, please call the factory.
Ohm Meter
Ordering Information
BCS Model Power Rating 8 R001 F
8 : 8W
Resistance Code R001: 0.001 Tolerance J = 5% Tol F = 1% Tol
3


▲Up To Search▲   

 
Price & Availability of BCS8R005F

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X